Manufacturer: TMQ Electronics, Australia

Designed for smaller boats it brings all the features of the more expensive models
into a single compact unit, without the need for a separate junction box. Features rudder
feed-back where rudder feedback is needed.

Includes AP-47R control unit, Electronic compass sensor with 5 metres of cable, mounting hardware and brackets, Rudder feedback unit, operation manual. Requires Reversing pump.

Manufacturer: TMQ Electronics, Australia

The TMQ AP-55 autopilot is undoubtedly the first choice for the discerning mariner.
Whilst being designed specifically to meet the stringent technological demands of
the modern marine industry, the AP-55 was also developed by TMQ with ease of
operation in mind.

Includes AP-55 Display unit, Control Unit (MCU),
standard rudder feedback unit with 14
metres of cable, compass sensor with 5
metres of cable, mounting hardware and
brackets plus an operation manual.  Requires pump.

Manufacturer: TMQ Electronics, Australia

Includes Main control unit, Rudder feedback unit with 14m cable, Compass sensor with 5m cable, Mounting hardware.  Requires pump.

Order Code: AP4

Manufacturer: TMQ Electronics, Australia

A practical and ergonomic approach to design means the AP9 settings can be quickly
adjusted by rotary control or touch pads. Precision steering is provided through rate
of turn, rudder limits and counter rudder in addition to standard weather, rudder and
trim controls.
The autopilot utilises digital processing with analogue controls, which results in
extremely reliable and accurate autopilot steering.

Includes Main control panel, Rudder feedback unit, Compass sensor with 5m cable, Mounting
Hardware and brackets, Operation Manual.  Requires pump.

Order Code: AP9

Manufacturer: Hydraulic Projects Ltd UK

Reversing pumps ideally suited for connecting autopilots to hydraulic steering systems. Our pumps from Hypro are amongst the most silent pumps available.  Every pump is fitted with check valves as standard and can be used with balanced or unbalanced cylinders. Can be used on sailing or powerboats.  The 0.6 and 1.0 LPM versions work well with the AP47 and AP47R.

Where xx = Output (i.e. 06/10/15/20/25); yy=motor voltage (i.e.12/24); Relief valve details

Manufacturer: Hydraulic Projects Ltd UK

Hydraulic constant running pumps are suitable for larger boats with hydraulic steering systems. They are used for connecting autopilots to the steering system as well as for joystick steering. They have a continuous running pump and two solenoids for starboard and port side steering. Can be used with all our autopilots except the smaller AP47 which is for reversible pumps only.

Requires separate supply.

Where yy=motor and solenoid voltage (i.e.12/24)

Manufacturer Octopus, Canada

This drive replaces the manual helm with a manual helm/autopilot drive combination. No unsightly autopilot drive is seen behind the steering wheel in front of the dash.

Order Code Type S Drive

Manufacturer Octopus, Canada

The Remote Sailboat Drive System makes it easy and economical to install an autopilot on  Sailboats with a displacement of up to 7000Kg (15400 lbs) which are steered with mechanical cable or tiller. The drive is very responsive and has little feedback resistance when in ‘Standby’ Pilot mode making it very suitable for racing Yachts.

The linear drive has a small footprint and can be fitted into very small spaces which makes it ideal for the smaller to mid-sized modern yachts which have limited space to fit drive units.

Order Code Type RS Drive